Stella

Stella - hatches, floor panels

While the glue on the deckhouse is curing we prepared several pieces like floor panels and deck hatches - time is money - , up to the final layer of coating. Throughout the whole painting job we use Epifanes 1 component marine paint.

Stella restoration: floor panels and deck hatch Stella restoration: floor panels and deck hatch Stella restoration: floor panels and deck hatch

Stella's new deck, well, partially renewed deck

Since temperatures are rising above zero again these days, it's the right timing to install our prepared iroko deckstrips. The strips measure 4 by 3,2 cms and a caulking seam was routed in advance, so we can decide to caulk the deck or just use some modern filling compound.

renovated deck for wooden fisher boat restoration project renovated deck for wooden fisher boat restoration project renovated deck for wooden fisher boat restoration project

Assembling and glueing the wheelhouse structure

The carefully measured and assembled pieces were glued together in about half an hour, because this type of PU glue cures very fast and leaves no room for mistakes. Stress in the shop!

Glueing the new wheelhouse structure - wooden fishing boat restoration project

The start of the new wheelhouse

Today we started building the frame of the new wheelhouse. First step is to cut dovetails in the massive meranti beams that will serve as a solid base for the construction. We will construct the wheelhouse in the shop, and we'll move the finished structure to the deck.

dovetailed beam for new wheelhouse wooden fishing boat restoration

New warping chocks for Stella, our fishing boat reconversion project

We decided to make 6 new warping chocks to replace the worn out original ones. They're solid oak, and they will be screwed and glued onto the gunwale.

new warping chocks, wooden boat restoration new warping chocks, wooden boat restoration new warping chocks, wooden boat restoration new warping chocks, wooden boat restoration new warping chocks, wooden boat restoration

New bulkheads for Stella

We've been installing new bulkheads in the Stella to create 3 separate waterproof compartments. This will make the boat safer and dryer, and will also reduce the noise from the motor in the wheelhouse.

Bulkhead for Stella, wooden boat restoration Bulkhead for Stella, wooden boat restoration Bulkhead for Stella, wooden boat restoration

Caulking lessons

Mister Louis Pincket visited our workshop this week and he gave a fantastic caulking demonstration. First he explained about the tools and caulking mallet used in this all but forgotten trade. After that he caulked a seam of our restoration project Stella. This live demo was worth more than a thousand books. For this, I thank you, Louis!

 

Mr Louis Piquet caulking the Stella Mr Louis Piquet caulking the Stella

New chapter in restoration project Stella

After drilling out the nailholes, Willy Godderie removed the old putty, and sealed the nails with an anti-corrosion paint. The next step will be filling the holes with an interlux seaming compound.
More to come.

Willy working on the Stella Willy working on the Stella Willy working on the Stella

Perkins overhauling

1. Crank case being removed and ready for reinstalling with new joints
2. Distribution lid removed and ready for checkup
3. Injection fuses removed and ready for testing

Perkins overhauling Perkins overhauling Perkins overhauling
Syndicate content